How to build on Ubuntu Linux [Openwall Community Wiki]

This is an old revision of the document!

How to install on Ubuntu

Install pre-requisites

Required stuff

  sudo apt-get install build-essential libssl-dev

Recommended (extra formats and performance)

  sudo apt-get install yasm libgmp-dev libpcap-dev libnss3-dev libkrb5-dev pkg-config

If you have an NVIDIA GPU (CUDA and OpenCL support)

  sudo apt-get install nvidia-cuda-toolkit nvidia-opencl-dev

If you have an AMD GPU (or want to use CPU as OpenCL device)

  sudo apt-get install fglrx-updates-dev

Optional MPI support

  sudo apt-get install libopenmpi-dev openmpi-bin

Optional REXGEN support (additional cracking modes)

  sudo apt-get install subversion cmake bison flex
  mkdir ~/src && cd ~/src
  svn checkout http://rexgen.googlecode.com/svn/trunk/ rexgen
  cd rexgen/src
  mkdir build && cd build
  cmake ..
  make && sudo make install

Clone latest bleeding-edge Jumbo and build

Clone GIT repo

  cd ~/src
  git clone git://github.com/magnumripper/JohnTheRipper -b bleeding-jumbo john

Build

  cd ~/src/john/src
  # For MPI, use './configure --enable-mpi' below
  ./configure && make -s clean && make -sj4

Test your build

  $ ../run/john --test=0 --format=cpu