John the Ripper CGMiner Integration

John the Ripper can check if there are running a CGMiner instance and pause to mine in those GPUs that are going to be used in a cracking session. When John the Ripper ends, the paused GPUs will start again to mine.

Furthermore you can set John the Ripper to start a new CGMiner Instance when the cracking session ends if there are not any other CGMiner instance.

Usage

Build/Configure

In order to build it, you need to clone the LordRafa's git repository:

git clone https://github.com/LordRafa/JohnTheRipper

after you have to go inside of src folder:

cd JohnTheRipper/src

change to bleeding-jumbo branch:

git checkout bleeding-jumbo

and compile the code with GPU support:

make linux-x86-64-gpu

Pause CGMiner GPUs

  1. You need to be sure that you start the CGMiner instance with the options:
    --api-listen --api-allow W:127.0.0.1/24 --api-port PORT
  2. Set the CGMiner API port in john.conf file:
    ...
    [Options:Miner]
    ...
    APIPort=PORT # PORT must be equal to CGMiner API port.
    ...

Start a CGMiner Instance After JtR Ends

  1. Set the option AfterEnd and AfterEndOptions in john.conf file.
    ...
    [Options:Miner]
    ...
    AfterEnd=1 # 1 - to enable Mine After End
               # 0 - to disable Mine After End
    AfterEndOptions= # CGMiner instance parameters.
    ...

The new CGMiner instance will be created with the parameters:

--api-listen --api-allow W:127.0.0.1/24
john/cgminer_integration.txt · Last modified: 2013/09/24 01:32 by Lord_rafa
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported
Recent changes RSS feed Donate to DokuWiki Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki Powered by OpenVZ Powered by Openwall GNU/*/Linux